Micro- and nano-mechanical characterization of polyamide 11 and its composites containing cellulose nanofibers

Nanocomposites from polyamide 11 and dried cellulose nanofibers (CNs), 16–30 nm in thickness and 50–400 nm in length, were prepared via direct melt mixing and their micro- and nano-mechanical properties were studied. (PF) QNM (Quantitative Nanomechanical Mapping) method was used to map nanomechanical properties at the surface of polyamide 11 and nanocomposites. This new AFM method emphasized both the increased modulus in nanocomposites as compared to the matrix and the microstructure on different levels in polyamide 11 and its nanocomposites. PF QNM showed that their crystalline structure consists of bundles of lamellar stacks, 200–350 nm in width and 20–40 nm wide lamellar stacks. Moreover, PF QNM study emphasized higher structural order in nanocomposites with 3 and 5 wt.% CNs and lower in the nanocomposite with 8 wt.% CNs as compared to the reference. These observations were verified and are consistent with both crystallinity values determined by DSC and micro-mechanical test results. The oriented bundles of lamellar stacks, observed by PF QNM, could be considered as the main blocks determining high mechanical properties for the studied nanomaterials.     

Structure-Activity Relationship, Cytotoxicity and Mode of Action of 2-Ester-substituted 1,5-Benzothiazepines as Potent Antifungal Agents

Our studies examined the structural features responsible for the antifungal activity of 2-ethoxycarbonyl-1,5- benzothiazepine （7a）. Three series of 1,5-benzothiazepine derivatives were synthesized and screened for their antifungal activity. The results suggested that the ethoxycarbonyl group at the 2 position and the imine moiety on the seven-membered ring are essential for activity. The most potent of the synthesized analogues （7a, 7b） were further studied by evaluating their cytotoxicity and mode of action （for 7a）. The results showed that compounds 7a and 7b were relatively safe for BV2 cells, but compound 7a interfered with Cryptococcus neoformans cell wall integrity by increasing the chitinase activity. Therefore, compound 7a was considered safe as an antifungal agent for animal cells.     

Quantitative assessment of rhodamine spectra

With the development of single-molecule detection and super-resolution fluorescence imaging, rhodamine dyes gain new life. Through the modification of the N-substituents and the replacement of the oxygen atom in xanthene, the wavelength and brightness can be effectively changed. However, the spectra of rhodamine, especially due to the balance between ring-closed non-fluorescent lactone and ring-opened fluorescent zwitterion/cation, are sensitive to interference from various environmental factors. In this way, the spectral data of various rhodamines reported by different research groups under different test conditions lacked comparability, sometimes even lacked accuracy. In order to meet the requirements for the accuracy and uniformity of spectral data in the research of single molecule imaging and dye structure-fluorescence relationship study, we have tested the spectra of fifteen rhodamine dyes that cover the visible and near-infrared regions under exactly the same conditions. By studying the dependence of the spectra on dye concentrations, it was confirmed that 1 μmol/L was ideal for detection less from the interference of dye molecule aggregation. We provide comprehensive and reliable spectral data of these fifteen dyes, which are expected to be used as references for future research. And the direct comparison of different rhodamine spectra would help to understand the structure-fluorescence relationship of rhodamines.     

Determination of Ti-6242 α and β slip properties using micro-pillar test and computational crystal plasticity

The properties and behaviour of an α−β colony Ti-6242 alloy have been investigated at 20 °C utilising coupled micro-pillar stress relaxation tests and computational crystal plasticity. The β-phase slip strength and intrinsic slip system strain rate sensitivity have been determined, and the β-phase shown to have stronger rate sensitivity than that for the α phase. Close agreement of experimental observations and crystal plasticity predictions of micro-pillar elastic-plastic response, stress relaxation, slip activation in both α and β-phases, and strain localisation within the α−β pillars with differing test strain rate, β morphology, and crystal orientations is achieved, supporting the validity of the properties extracted. The β-lath thickness is found to affect slip transfer across the α−β−α colony, but not to significantly change the nature of the slip localisation when compared to pure α-phase pillars with the same crystallographic orientation. These results are considered in relation to rate-dependent deformation, such as dwell fatigue, in complex multiphase titanium alloys.     

Quantitative leak test for microholes and microtears in whole gloves and glove pieces

The current leak tests for gloves are qualitative. The developed quantitative leak test uses vacuum pressure to draw measured volumes of water to detect microholes/tears in whole gloves and glove pieces. A modified plastic vacuum desiccator interfaced with a Frazier air permeability tester allowed exposure of disposable unsupported/unlined/powderless Kimtech Blue nitrile to 50 mL of water for glove pieces or to 600 mL within a whole glove at vacua of 8–9 in. (20–23 cm) and 11–12 in. (28–30 cm) water gauge, respectively. Punctures of known dimensions were made before testing in specific glove areas using 21-, 22-, 26-, 30-, and 33-gauge needles (outer/inner diameters in micrometres of 873/514, 794/413, 635/311, 476/127, 318/159 and 238/133, respectively). The length of the punctures varied from 0.13 ± 0.01 to 0.80 ± 0.11 mm. Flow rates of water through the holes/tears ranged from 2.5 ± 0.4 to 106 ± 7 mL/min for glove pieces. For whole gloves, the ranges were from 31 ± 9 to 543 ± 110 mL/min in the palm area; and 0.23 ± 0.06 to 82 ± 18 mL/min in the finger/fingertip area. The method quantified tear lengths as short as 0.13 ± 0.01 mm.     

The Determination of Lactate or Acetate in Intravenous Infusions and Haemodialys1S Solutions by 1H NMR Spectroscopy

A ¹H NMR spectroscopic determination for acetate and lactate in intravenous and haemodialysis solutions is reported. The methyl resonances of acetate and lactate were chosen for integration using N-methylurea and sodium acetate, respectively, as internal standards. The results obtained indicate that the quantitative measurements are reproducible. The method provides also a specific identification of the analytes.     

Quantitative modeling and mapping of blistering zone of the Magoksa Temple stone pagoda (13th century,Republic of Korea) by graduated heating thermography

Blistering occurring at the stone’s subsurface layer is easily overlooked compared to different deterioration types, so conservation treatments are not applied often. Therefore, non-destructive detection and mapping of blistering zones with the infrared thermography are very important for preservation of the original forms of stone monuments. In this study, the critical temperature and transitional zone of the blistering zone were established by drawing the temperature distribution curve and the mapping for blistering zone was completed by monochrome process and extraction of vector lines. Analysis of the blistering deterioration degree of the Magoksa Temple stone pagoda with the quantitative modeling yielded a total area and average rate of blistering zones of approximately 2.6 m² and 7.4%, respectively. Thus, there is a high probability of scaling on the stone pagoda (area of approximately 2.6 m²) if conservation treatment is not applied to the blistering zones as early as possible. Therefore, the blistering zones require joining and filling, and state changes of the blistering zones should be continuously monitored after completion of the intensive conservation treatments. Modeling will improve the reliability of deterioration maps by mapping for blistering zone; most deterioration maps to date have overlooked blistering zones.     

Analytical challenges and the development of biomarkers to measure and to monitor the effects of ocean acidification

Changing ocean-carbonate chemistry caused by oceanic uptake of anthropogenic atmospheric carbon dioxide leads to the formation of carbonic acid, thus lowering the pH of the sea with predictions of a decrease from current levels at 8.15 to 7.82 by the end of the century. The exact measurement of subtle pH changes in seawater over time presents significant analytical challenges, as the equilibrium constants are governed by water temperature and pressure, salinity effects, and the existence of other ionic species in seawater.Here, we review these challenges and how pH also affects dissolved inorganic and organic chemicals that affect biological systems. This includes toxic compounds (xenobiotics) as well as chemicals that are beneficial for marine organisms, such as the chemical signals (i.e. pheromones) that are utilized to coordinate animal behavior. We review how combining analytical, molecular and biochemical tools can lead to the development of biosensors to detect pH effects to enable predictive modeling of the ecological consequences of ocean acidification.